Yaskawa J1000 Compact Vector Control Drive - Manual (Page 188)

No. Name Description
F6-52 DeviceNet PCA Setting
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-53 DeviceNet PPA Setting
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-54
DeviceNet Idle Mode Fault
Detection
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-55 DeviceNet Baud Rate Monitor
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1012 and later.
F6-56 DeviceNet Speed Scaling
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-57 DeviceNet Current Scaling
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-58 DeviceNet Torque Scaling
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-59 DeviceNet Power Scaling
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-60 DeviceNet Voltage Scaling
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-61 DeviceNet Time Scaling
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-62 DeviceNet Heartbeat Interval
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
F6-63
Dynamic Output Assembly 109
Parameter 1
Note: Function available in versions
PRG: 1012 and earlier.
Refer to V1000 Technical Manual for details.
MAC ID Memory
Note: Function available in versions
PRG: 1014 and later.
F6-64
Dynamic Output Assembly 109
Parameter 2
Note: Function available in versions
PRG: 1012 and earlier.
Refer to V1000 Technical Manual for details.
Dynamic Output Assembly 109
Parameter 1
Note: Function available in versions
PRG: 1014 and later.
F6-65
Dynamic Output Assembly 109
Parameter 3
Note: Function available in versions
PRG: 1012 and earlier.
Refer to V1000 Technical Manual for details.
Dynamic Output Assembly 109
Parameter 2
Note: Function available in versions
PRG: 1014 and later.
B.1 Parameter Table
188 YASKAWA ELECTRIC TOEP C710606 47C YASKAWA AC Drive – V1000 Quick Start Guide