Yaskawa J1000 Compact Vector Control Drive - Manual (Page 189)

No. Name Description
F6-66
Dynamic Output Assembly 109
Parameter 4
Note: Function available in versions
PRG: 1012 and earlier.
Refer to V1000 Technical Manual for details.
Dynamic Output Assembly 109
Parameter 3
Note: Function available in versions
PRG: 1014 and later.
F6-67
Dynamic Output Assembly 159
Parameter 1
Note: Function available in versions
PRG: 1012 and earlier.
Refer to V1000 Technical Manual for details.
Dynamic Output Assembly 109
Parameter 4
Note: Function available in versions
PRG: 1014 and later.
F6-68
Dynamic Output Assembly 159
Parameter 2
Note: Function available in versions
PRG: 1012 and earlier.
Refer to V1000 Technical Manual for details.
Dynamic Output Assembly 159
Parameter 1
Note: Function available in versions
PRG: 1014 and later.
F6-69
Dynamic Output Assembly 159
Parameter 3
Note: Function available in versions
PRG: 1012 and earlier.
Refer to V1000 Technical Manual for details.
Dynamic Output Assembly 159
Parameter 2
Note: Function available in versions
PRG: 1014 and later.
F6-70
Dynamic Output Assembly 159
Parameter 4
Note: Function available in versions
PRG: 1012 and earlier.
Refer to V1000 Technical Manual for details.
Dynamic Output Assembly 159
Parameter 3
Note: Function available in versions
PRG: 1014 and later.
F6-71
Dynamic Output Assembly 159
Parameter 4
Note: Function available in versions
PRG: 1014 and later.
Refer to V1000 Technical Manual for details.
F7: EtherNet/IP and Modbus TCP/IP Option Parameters
Use F7 parameters to program the drive for EtherNet communication.
F7-01 to
F7-42
EtherNet/IP and Modbus TCP/IP
Option Parameters
F7 parameters are reserved for use with SI-EN3/V and SI-EM3/V
options. Refer to the respective Option Installation Manuals for
details.
B.1 Parameter Table
YASKAWA ELECTRIC TOEP C710606 47C YASKAWA AC Drive – V1000 Quick Start Guide 189
B
Parameter List