Yaskawa J1000 Compact Vector Control Drive - Manual (Page 205)

No. Name Description
o3-02 Copy Allowed Selection Refer to V1000 Technical Manual for details.
o4: Maintenance Period
Use o4 parameters to perform maintenance.
o4-01
Accumulated Operation Time
Setting
Sets the starting value for the cumulative operation time of the drive in
units of 10 h.
o4-02
Accumulated Operation Time
Selection
0: Logs power-on time
1: Logs operation time when the drive output is active (output operation
time).
o4-03
Cooling Fan Operation Time
Setting
Refer to V1000 Technical Manual for details.
o4-05 Capacitor Maintenance Setting Refer to V1000 Technical Manual for details.
o4-07
DC Bus Pre-Charge Relay
Maintenance Setting
Refer to V1000 Technical Manual for details.
o4-09 IGBT Maintenance Setting Refer to V1000 Technical Manual for details.
o4-11 U2, U3 Initialization
0: Saves the fault monitor data.
1: Resets the fault monitor data to 0. (The value of o4-11 is
automatically returned to 0.)
o4-12 kWh Monitor Initialization Refer to V1000 Technical Manual for details.
o4-13
Number of Run commands
Initialize selection
Refer to V1000 Technical Manual for details.
q: DriveWorksEZ Parameters
q1-01 to
q6-07
DriveWorksEZ Parameters Reserved for DriveWorksEZ.
r: DriveWorksEZ Connection Parameters
r1-01 to
r1-40
DriveWorksEZ Connection
Parameters 1 to 20 (upper/lower)
Please refer to the Help file included with the DriveWorksEZ software
package for details.
T: Motor Tuning
Enter data into the following parameters to tune the motor and drive for optimal performance.
T1-00 Motor Selection 1/2
1: 1st Motor - E1 to E2
2: 2nd Motor - E3 to E4 (this selection is not displayed if motor 2 has
not been selected)
T1-01 Auto-Tuning Mode Selection
0: Rotational Auto-Tuning
2: Stationary Auto-Tuning
3: Rotational Auto-Tuning for V/f control
T1-02 Motor Rated Power Sets the motor rated power in kilowatts (kW).
T1-03 Motor Rated Voltage Sets the motor rated voltage in volts (V).
T1-04 Motor Rated Current Sets the motor rated current in amperes (A).
T1-05 Motor Base Frequency Sets the base frequency of the motor in Hertz (Hz).
T1-06 Number of Motor Poles Sets the number of motor poles.
T1-07 Motor Base Speed Sets the base speed of the motor in revolutions per minute r/min (RPM).
T1-11 Motor Iron Loss Provides the iron loss for determining the Energy Saving coefficient.
B.1 Parameter Table
YASKAWA ELECTRIC TOEP C710606 47C YASKAWA AC Drive – V1000 Quick Start Guide 205
B
Parameter List