Yaskawa J1000 Compact Vector Control Drive - Manual (Page 203)

No. Name Description
n2-03
Speed Feedback Detection Control
(AFR) Time Constant 2
Refer to V1000 Technical Manual for details.
n3: High-Slip Braking
Use n3 parameters to configure the high-slip braking function.
n3-01
High-Slip Braking Deceleration
Frequency Width
Refer to V1000 Technical Manual for details.
n3-02 High-Slip Braking Current Limit Refer to V1000 Technical Manual for details.
n3-03
High-Slip Braking Dwell Time at
Stop
Refer to V1000 Technical Manual for details.
n3-04
High-Slip Braking Overload
Time
Refer to V1000 Technical Manual for details.
n3-13 Overexcitation Deceleration Gain Refer to V1000 Technical Manual for details.
n3-21
High-Slip Suppression Current
Level
Refer to V1000 Technical Manual for details.
n3-23
Overexcitation Operation
Selection
Refer to V1000 Technical Manual for details.
n6: Online Tuning of Resistance between Motor Lines
Use n6 parameters to adjust the motor line-to-line resistance while the drive is online.
n6-01
Line-to-Line Motor Resistance
Online Tuning
Refer to V1000 Technical Manual for details.
n8: Permanent Magnet (PM) Motor Control
Use n8 parameters to control the PM motor control.
n8-45
Speed Feedback Detection Control
Gain
Refer to V1000 Technical Manual for details.
n8-47
Pull-In Current Compensation
Time Constant
Refer to V1000 Technical Manual for details.
n8-48 Pull-In Current Refer to V1000 Technical Manual for details.
n8-49 d-Axis Current for High-
Efficiency Control
Refer to V1000 Technical Manual for details.
n8-51 Acceleration Pull-In Current Refer to V1000 Technical Manual for details.
n8-54
Voltage Error Compensation Time
Constant
Refer to V1000 Technical Manual for details.
n8-55 Load Inertia Refer to V1000 Technical Manual for details.
n8-62 Output Voltage Limit Refer to V1000 Technical Manual for details.
n8-63 Output Voltage Limit Gain 1
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1018 and later.
n8-65
Speed Feedback Detection Control
Gain during ov Suppression
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1011 and later.
n8-68 Output Voltage Limit Gain 2
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1018 and later.
n8-87 Output Voltage Limit Selection
Refer to V1000 Technical Manual for details.
Note: Available in drive software versions PRG: 1018 and later.
B.1 Parameter Table
YASKAWA ELECTRIC TOEP C710606 47C YASKAWA AC Drive – V1000 Quick Start Guide 203
B
Parameter List