Yaskawa J1000 Compact Vector Control Drive - Manual (Page 166)

Item Specification
Three-Phase Drive Model 2A0001 2A0002 2A0004 2A0006 2A0010 2A0012 2A0020
Single-Phase Drive Model
<1>
BA0001 BA0002 BA0003 BA0006 BA0010 BA0012 BA0018
Harmonic Corrective
Actions
DC Link Choke Optional
<1> Drives with single-phase power supply input will output three-phase power and cannot run a single-phase motor.
<2> 2A0020 only. BA0018 is available with a Heavy Duty rating only.
<3> The motor capacity (HP) refers to a NEC rated 4-pole motor. The rated output current of the drive output amps
should be equal to or greater than the motor rated current.
<4> Input current rating varies depending on the power supply transformer, input reactor, wiring connections, and
power supply impedance.
<5> Rated motor capacity is calculated with a rated output voltage of 230 V.
<6> Carrier frequency is set to 2 kHz (Swing PWM). Current derating is required in order to raise the carrier
frequency.
<7> Carrier frequency is set to 10 kHz. Current derating is required in order to raise the carrier frequency.
<8> Carrier frequency is set to 8 kHz. Current derating is required in order to raise the carrier frequency.
<9> DC is not available for UL standards.
A.2 Single/Three-Phase 200 V Class Drives
166 YASKAWA ELECTRIC TOEP C710606 47C YASKAWA AC Drive – V1000 Quick Start Guide