Grass Valley Profile XP Aug 16 2004 - Manual (Page 99)

Identifying disk modules prior to removal
23 July 2004 Profile XP System Guide 99
To identify a disk module
1. Right-click the disk icon in the tree view, then select Identify Disk in the context
menu.
2. Perform one of the following steps:
- For PFR500 systems, click OK to identify disk modules in the selected LUN.
Disk modules remain identified for 30 seconds. You can locate the disk modules
now.
- For PFR600 systems, locate the disk module now by locating the flashing blue
LED. Click OK to extinguish the LED.
- For PFC500 and PFR700 systems, locate the disk modules now by locating the
flashing amber LEDs. Click OK to extinguish the flashing LED.
This concludes the disk identification procedure.