Grass Valley Profile XP Aug 16 2004 User Manual
Page 267
Set machine name and IP address on each Profile XP system
23 July 2004
Profile XP System Guide
267
7. Set up the IP address as follows:
a. In the Network dialog box click the
Protocols
tab.
b. Highlight
TCP/IP Protocol
and then click
Properties
.
c. Click the
IP Address
tab, then click
Specify IP Address
.
d. Enter an IP address for the Profile XP.
e. If you are not connecting to an existing network, you can choose any IP address
you want. Here are some examples of IP addresses and names you could use:
Computer Name:
Profile1
Ethernet Address:
192.168.99.1
Computer Name:
Profile2
Ethernet Address:
192.168.99.2
f. Verify the Subnet Mask is set to 255.255.255.0.
g. Click
OK
to close the TCP/IP Properties dialog box, then click
OK
to close the
Network dialog box.
h. When asked to reboot click
NO
, then close the
Control Panel
.
i. Shutdown Windows NT, then power-off the Profile XP when the message is
displayed to do so.