Grass Valley Profile XP Aug 16 2004 - Manual (Page 257)

Setting Options
23 July 2004 Profile XP System Guide 257
Setting Options
1. In the local control mode, select Options . The Options dialog box opens.
2. Specify the current working folder. This is the folder to which clips are recorded
and from which clips are loaded.
3. Select the Timecode mode and the E to E mode.
4. Click OK to save settings and close.
#
Clip Name Edit Control Displays the clip’s name and location in the media storage system.
To rename the clip, click the Clip Name, then enter text. To change
the current bin, i.e. the target location for recording clips, refer to
“Setting Options” on page 257.
$ Eject Clip Ejects the currently loaded clip.
%
Active/Preview Button Toggle to specify active clip or preview clip.
&
Time Dome This indicator displays record progress.The Time Dome indicates
one revolution every 10 seconds.
'
Transport Controls Controls the currently loaded clip.
(
Mark-in and Mark-out Displays mark-in or mark-out points.
) Length Displays clip length
* Local/Remote Control
Mode Toggle Click to toggle between status mode and local control mode. In status
mode, only the Configure button is enabled. In local control mode,
controls are enabled and the channel can be controlled by the local
AMP application OR by a remote AMP application or device.
Control Description and User Operation
Rewind Play Record Fast
Fwd Stop Prev
Frame Next
Frame