Setting up the vitc generator on a video output – Grass Valley Profile XP Aug 16 2004 User Manual
Page 227
Setting up the VITC generator on a video output
23 July 2004
Profile XP System Guide
227
Setting up the VITC generator on a video output
NOTE: This page appears only if the system reference source is Reference Black
and one or more standard definition SDI boards are installed. HD SDI outputs do
not appear in the VITC Setup list because VITC, as Ancillary Data, is not
line-specific.
To set up the VITC generator:
1. Choose Video Output in the Configuration Manager window. The Video Output
dialog box appears.
2. Click
Next
to navigate to Video Output page 2 of 3.
3. Select a video output from the list or click
Select All
to configure all video inputs
at the same time.
6. Type or select the line numbers where the VITC signals should be generated using
the
Line 1
,
Line 2
drop-down lists.
4. Click
Finish
save your settings.