Grass Valley Profile XP Aug 16 2004 - Manual (Page 255)

Configuring AMP protocol control
23 July 2004 Profile XP System Guide 255
3. Click the Configure button,
- or -
On the File menu, click Configure . The Configure dialog box opens.
4. On the Channel drop-down list, select the local Profile XP channel to be controlled
by AMP protocol.
5. Select either RS422 or Ethernet for the type of communication you are using for
AMP protocol. If you select RS422, also select the Port you are using.
6. Click OK to save changes and close. If the selected channel is currently allocated
to another application, a message informs you that it is not available.
After a pause (indicated by “Connecting…Please wait” in the status bar) the selected
channel is allocated to the AMP protocol. The channel remains allocated as long as the
AMP application remains open.
You can now control the Profile XP channel with the AMP protocol using a remote AMP
application or device. To control the channel with the AMP protocol using the local
AMP application, continue with the next section “Using the AMP application for local
control”.