Grass Valley Profile XP Aug 16 2004 - Manual (Page 62)

Chapter 2 Working with Configuration Manager
62 Profile XP System Guide 23 July 2004
Remote configuration
You can remotely configure Profile XP systems connected to the Ethernet network with
Configuration Manager running on a Profile XP or on a standard Windows NT
workstation. The Windows NT workstation must have Profile XP software and
Windows NT version 4.0 or later installed. (Refer to your Profile XP Software Release
Notes for more information on installing Profile software on an Windows NT
workstation.
To configure remote Profile XP systems:
1. Set up the Windows NT Ethernet network using the procedures in Chapter 11,
“Setting up a Simple Network”, then return to this procedure.
2. Install Profile system software on the Windows NT workstation you want to use to
monitor and configure remote Profile XP systems.
3. Start Port Server on all Profile XP systems by double-clicking the Port Server
shortcut on the desktop or choose Start | Programs | Profile Applications | Port
Server .
0624-16
Profile XP
Profile XP
Profile XP
NT Workstation
running Profile
Remote Applications
Ethernet
Windows NT
Workstation running
Configuration Manager