Deleting unwanted vitc and other vbi signals – Grass Valley Profile XP Aug 16 2004 User Manual
Page 228
Chapter 7 Modifying a Channel: Timecode Settings
228
Profile XP System Guide
23 July 2004
Deleting unwanted VITC and other VBI signals
You can remove unwanted VITC signals that may be present in a recorded video clip or
on the output during E to E. You can select which lines are cleared, which you would
typically do if you are inserting ancillary data on your output. Blanking level is inserted
in place of the VBI information. Lines are erased before ancillary data is inserted.
To erase data from vertical blanking lines:
1. Choose Video Output in the Configuration Manager Window. The Video Output
dialog box appears.
2. Click
Next
to navigate to Video Output page 2 of 3.
3. Select a video output from the list or click
Select All
to configure all the video
outputs at the same time.