Grass Valley Profile XP Aug 16 2004 - Manual (Page 256)

Chapter 10 Controlling the Profile XP Remotely
256 Profile XP System Guide 23 July 2004
Using the AMP application for local control
Open the AMP application at C:/profile/ampclient.exe. To use the AMP application for
local control, a channel must first be allocated as in “Setting up AMP remote control” on
page 254. Toggle to the local control mode by clicking the
L\R button.
The following describes the controls and indicators used in the local control mode.
Control Description and User Operation
! Control Buttons
(The control buttons
function the same as the File
menu items.) New Clip – Used to create and name a clip prior to starting the
recording. A default clip name is generated by incrementing some
seed name, for example, Clip_2 if the last clip created was Clip_1.
To rename the clip, click the clip name and enter a new name.
Load – Select to open the Load dialog, which displays the contents
of the current bin. Select a clip, then choose Load. See “Loading a
clip” on page 258.
Options – Opens the Options dialog box. See “Setting Options” on
page 257.
Configure – Opens the Configure dialog box. See “Configuring
AMP protocol control” on page 254.
" Clip/Preview Timecode Indicates the current timecode of the timecode source. The timecode
value of XX:XX:XX:XX is displayed if there is no input timecode.
Clip/Preview
Timecode
Active/Preview Button
(Click to toggle
between active
& preview clip)
2
5
3 Clip Name &
Current Bin
6 Time Dome Local/Remote
Control Mode
Toggle Mark-In &
Mark-Out Length 8 10
Eject
Clip 4
Control
Buttons 1
7 Transport
Controls
9