Grass Valley Profile XP Aug 16 2004 - Manual (Page 91)

Unbinding LUNs for reconfiguration
23 July 2004 Profile XP System Guide 91
9. Upon 100% completion, click Close in Progress Report window.
10. When the reboot message appears, click OK , then reboot the Windows operating
system on the Profile XP media platform. Afterward, the system is ready for
operation.
Unbinding LUNs for reconfiguration
Unbinding may be necessary to reconfigure the disk modules in the RAID storage
system. You must unbind a LUN before you can bind the disk modules in a different
configuration.
When redeploying an Expansion Chassis that was bound using a PFR500 or PFR600
RAID Controller Chassis, always use the GVG Disk Utility to unbind the disk modules
in the expansion chassis before disconnecting them from the original RAID Controller
chassis.
CAUTION: Unbinding destroys all user media files stored on the disk modules.
This section includes the following procedures:
• Unbinding LUNs: PFC500 and PFR700 Storage Systems
• Unbinding LUNs: PFR500 and PFR 600 Storage Systems
Unbinding LUNs: PFC500 and PFR700 Storage Systems
If you need to unbind LUNs, perform the following:
1. Start Configuration Manager using the desktop shortcut or by selecting Start |
Programs | Profile Applications | Configuration Manager .
2. In Configuration Manager, click File System to start the GVG Disk Utility.
3. Expand the tree view and identify bound LUNs.
!