H3C Technologies H3C S10500 Series Switches - Manual (Page 92)

82
I type
0404A01A (3
m, or 9.8 ft)
Australia N/A N/A
Plug outline Power cord outline Connector outline
NOTE:
The connector outline figures shown in the table are C19 straight connectors.
PoE power system (optional)
PoE PEM
Table 33 PoE PEM specifications
Item LSUM1PPEMA0 LSUM1PPEMB0
Input voltage range –52 to +57 VDC –52 to +57 VDC
Input current 60 A 2 × 45 A
Compatible device models 1 × S10506 1 × S10510
PoE power modules
You can use a maximum of six PoE power modules for an external PoE power frame.
Table 34 PoE power module specifications
Item Specification
Rated input voltage range
100 VAC to 120 VAC @ 50/60 Hz
200 VAC to 240 VAC @ 50/60 Hz
Maximum input voltage
range
90 VAC to 264 VAC @ 47 to 63 Hz
Maximum input current 13.3 A
Maximum output power
1200 W (100 VAC to 120 VAC)
2000 W (200 VAC to 240 VAC)
PoE power cords
• PoE DC power cords
PoE DC power cords are used to connect the PoE PEMs and PoE external power frames for the
S10506 and S10510 switches.