H3C Technologies H3C S10500 Series Switches - Manual (Page 24)

14
Figure 10 Installing cage nuts (S10508 as an example)
(1) Cage nuts
Installing an air filter (optional)
Air filters are optional for the S10500 switches. If you have ordered air filters, install the air filters before
mounting the switch in the rack.
• S10508-V—Install the air filter over the air inlet vents at the lower part of the switch. For the
installation procedures, see S10508-V Air Filter User Manual.
• Other models—Install the air filter on the left side of the chassis.
{
For how to install an air filter on an S10504 or S10506 switch, see S10504 Air Filter User
Manual.
{
For how to install an air filter on an S10508 or S10510 switch, see S10508 Air Filter User
Manual.
{
For how to install an air filter on an S10512 switch, see S10512 Air Filter User Manual.