H3C Technologies H3C S10500 Series Switches - Manual (Page 42)

32
Figure 32 Connecting the monitoring cable
Connecting the external PoE power frame to the power source
Each receptacle on the external PoE power frame corresponds to a power module slot. To enable a
power module to operate, connect the AC power cord to the correspondent receptacle.
To connect the external PoE power frame to the power source:
1. Insert the connector of the AC power cord into the receptacle of a power module.
2. Use the cable tie to secure the power cord to the power cord management bracket.
3. Repeat steps 1 and 2 for other power modules.
4. Connect connectors at the other end of the power cords to the 16A power source.
Figure 33 Connecting the external PoE power frame to the power source
16A
5
3
4
1
2