H3C Technologies H3C S10500 Series Switches - Manual (Page 103)

93
NOTE:
•
The LSUM1CGC2EC0 card does not support the CFP-40G-LR4-SM1310(LSUM1CFP0) transceiver
module.
• The LSUM1CGC2SE0 card does not support the CFP-40G-LR4-SM1310(LSUM1CFP0) transceiver
module.
• The LSUM1QGC4SF0 card does not support the CFP-100G-LR4-WDM1300-A transceiver module.
40-GE QSFP+ transceiver modules
Table 58 40-GE QSFP+ transceiver module specifications
Model
Central
wavelength Connector Fiber
Modal
bandwidth
Max transmission
distance
QSFP-40G-SR4-
MM850
850 nm MPO
50/125 μm
multi-mode fiber
2000
100 m (328.08 ft),
OM3
4700
150 m (492.13 ft),
OM4
QSFP-40G-SR4-
MM850-NDDM 850 nm
MPO
50/125 μm
multi-mode fiber
2000
100 m (328.08 ft),
OM3
4700
150 m (492.13 ft),
OM4
QSFP-40G-CSR
4-MM850
850 nm MPO
50/125 μm
multi-mode fiber
2000 300 m (984.25 ft)
4700 400 m (1312.34 ft)
QSFP-40G-CSR
4-MM850-NDD
M
850 nm MPO
50/125 μm
multi-mode fiber
2000 300 m (984.25 ft)
4700 400 m (1312.34 ft)
QSFP-40G-LR4-
WDM1300
1271 nm LC
9/125 μm
single-mode fiber
N/A 10 km (6.21 miles)
1291 nm LC
9/125 μm
single-mode fiber
N/A 10 km (6.21 miles)
1311 nm LC
9/125 μm
single-mode fiber
N/A 10 km (6.21 miles)
1331 nm LC
9/125 μm
single-mode fiber
N/A 10 km (6.21 miles)
NOTE:
The QSFP-40G-LR4-WDM1300 transceiver module cannot be connected to a 10-Gbps SFP+ transceiver
module.
40-GE QSFP+ DAC cables
The LSWM1QSTK0, LSWM1QSTK1, and LSWM1QSTK2 cables are used to connect 40-GE QSFP+
ports.