Welltech SIPPBX 6200 V.3.1.1 - Manual (Page 92)

Welltech Technology Co., Ltd.
SIPPBX 6200S, 6200GS, 6200N Release 3.1.1
User Guide
- 92 -
Figure 6.14-1
Parameter Description:
• User Agent ID: Identifier was used for subscriber setting (type UAC).
• Register ID: SIP registrar user ID.
• Register TEL No: SIP registrar user telephone number.
• Register Password: SIP registrar user password.
• Register Realm: SIP registrar realm (domain).
• Register IP: SIP registrar IP address.
• Register Port: SIP registrar UDP port number.
• Register TTL: The registration maximum time to live setting when
registered to the SIP registrar.
• Outbound Proxy TEL No: SIP outbound proxy server user telephone
number.
• Outbound Proxy User ID: SIP outbound proxy server user ID.
• Outbound Proxy Password: SIP outbound proxy server user password.
• Outbound Proxy IP: SIP outbound proxy server IP address.
• Outbound Proxy Port: SIP outbound proxy server port number.
• Description: Description.
• Encrypt: The device for UAC is encrypted or not.
To set a gateway as a register client, choose register type to "register UAC".
Then you can use this gateway Tel number for prefix hunting.
Broadcast Group
The administrator can setup different broadcasting group to simplify the
broadcasting behavior. To start a broadcasting service, dial the broadcasting
prefix + broadcasting group ID. If you only dial the broadcasting prefix, the
office default broadcasting group will be used. Specified CPE device (i.e IP
Phone only, not for FXS gateway) is required to accept the broadcasting
service request.