Welltech SIPPBX 6200 V.3.1.1 - Manual (Page 50)

Welltech Technology Co., Ltd.
SIPPBX 6200S, 6200GS, 6200N Release 3.1.1
User Guide
- 50 -
Parameter Description:
• Active Mode: The prefix group is active or inactive.
• Prefix Matched: Called number prefix to be matched.
• Description: Description
• Matched Length: Applied only when specified length of Called number was
matched. Zero (0) indicates ignoring length option.
• Matched Office: Applied only for specified office. Other office will not be
applied.
• Hunting Method: Hunting method used for this group.
- Round Robin: Call is hunting rotationally until user answer.
- Priority: Call is hunting base on priority setting until user answer.
- Max Idle Time: Max Idle one will be hunt first until user answer.
- Ring All (First Answer) : Send request to all members. When a user pickup
the phone before others, cancel the others request.
- Round Robin (Ring Only) : Send request based on round robin member
selection. Stop hunting when a user responses ringing.
- Priority (Ring Only) : Send request based on member's priority. Stop
hunting when a user responses ringing.
- Max Idle Time (Ring Only) : Send request base on most idle time policy.
Stop hunting when a user responses ringing.
- Round Robin (Load Balance) : Send request based on round robin
member selection. Stop hunting when returned code was defined in the
Load Balance Reason Code.
- Priority (Load Balance) : Send request based on member's priority. Stop
hunting when return code is defined in the Load Balance Reason Code.
- Max Idle Time (Load Balance) : Send request base most idle policy. Stop
hunting when return code is defined in the Load Balance Reason Code.
- RADIUS Route : Let the RADIUS to decide the routing. It is mainly used for
least cost routing or QOS routing. It requires to use WellBilling 6600
Release 2.0.
- ENUM : This routing is using ENUM DNS server to decide the routing. You
have to set the corresponding ENUM DNS in the Networking settings. If
you are trying to accept ENUM incoming call, you also need to enable the
Accept Anonymous Call to Subscriber in system configuration. Otherwise,
the call from ENUM (unknown host) will be rejected.
 No Answer Timeout: The maximum time (in second) to wait for the remote
party to answer (pick up phone).
• First Response Timeout: The maximum time to wait for device response. It
depends on the network quality.
• Announcement URI: Enable announcement or not.
• Remove Prefix: Remove prefix matched or not
• RADIUS Authorization Resend: Whether to send RADIUS authorization when
doing next hunting or not
Click
Detail button to define member of call routing group: