Welltech SIPPBX 6200 V.3.1.1 - Manual (Page 29)

Welltech Technology Co., Ltd.
SIPPBX 6200S, 6200GS, 6200N Release 3.1.1
User Guide
- 29 -
Step 4: Here you can setup the conference, VMS and call transit parameters.
Figure 3.4-4
Parameter Description:
• Virtual Conference Active Mode: To enable the virtual conference service or
not.
• Virtual Conference Room: Virtual conference room number. This conference
room was created by Extension. Any invited Extension to join this conference
room, simply dial prefix code + Extension number of Conference room
creator.
• Default VMS Language: Select default VMS language
• VMS Personal Greeting: Enable personal greeting or not
• Notice Email Address: Email address to send when an voice mail was left at
this VMS.
• Transit Call : Allow to call to PSTN number inside the Auto Attendant or not.
The administrator needs to add transit call component in auto attendant call
flow editor. The sample call flow can be downloaded from Welltech support
web site. To implement this call, an Call Authorization PIN Prefix has to be
entered first. See Figure3.2-3. This feature is used to redirect an incoming call
from PSTN network (i.e. FXO or E1 gateway) to another line of PSTN network
via IVR’s prompt after authenticate PIN prefix.
PSTN Gateway Setup Wizard
The PSTN gateway is used to setup the FXO or E1/T1 Gateway in order to call
PSTN (Telecom) network from IP-PBX extension.
Start Path: Home > PSTN Gateway Setup Wizard
Step 1: Here you can setup the basic parameters such as register number and
telephone number for the selected PSTN gateway.