Wakeup call, Akeup – Welltech SIPPBX 6200 V.3.1.1 User Manual
Page 69
Welltech Technology Co., Ltd.
SIPPBX 6200S, 6200GS, 6200N Release 3.1.1
User Guide
- 69 -
Parameter Description:
•
Language ID: Language ID.
•
Language: Language.
•
TTS: Enable the TTS (Text to Speech) or not. When you enable the TTS, the
6200 will try to load corresponding TTS0?.zip. If it failed, SIPPBX 6200x will
use English for TTS.
Call Flow Editor please refer to
Wakeup Call
The SIPPBX 6200x can call the extension to wake up user. Please refer
Appendix 7 Step by Step example for Wakeup Call
Here you can set the wake up call parameters.
Start Path: Enhance Service > Config > Wakeup Call
Figure 6.9-1
Parameter Description:
•
Wakeup Call Prefix: Wakeup call service prefix code.
•
Max Tolerance Time (mins): Used to indicate the maximum tolerance time for
SIPPBX 6200x to call the extension to wake up the user. When the time
exceeds the defined time here, the SIPPBX 6200x won’t call the extension.
•
Max Retry Count: The maximum retry times when the extension which will be
waked up is busy.
•
Retry Interval (seconds): The interval for SIPPBX 6200x to retry the extension
when it is unreachable.
•
Wakeup Call Prompt Language: The default voice prompt language for the
user when he answers this call.
•
Max Operation Timeout (seconds): The maximum operation time in seconds.
The SIPPBX 6200x will stop the wakeup call automatically if the extension is
not hung up and when the Wakeup Greeting Report Count is set to Repeat
Forever.
•
No Answer Timeout (secs): The maximum ringing time when no person
answers the wakeup call.
•
Wakeup Greeting Repeat Count: The wakeup greeting broadcast times when
the extension is not hung up. If you set the count is 3, then the SIPPBX 6200x
will announce the wakeup greeting 3 times and stop the operation
automatically.
- Repeat Forever: The SIPPBX 6200x will announce the wakeup greeting
until the called party hang up the call or reach the maximum operation
time.