Welltech SIPPBX 6200 V.3.1.1 - Manual (Page 61)

Welltech Technology Co., Ltd.
SIPPBX 6200S, 6200GS, 6200N Release 3.1.1
User Guide
- 61 -
wide total broadcasting target is same as DSP channel license.
• Server Broadcast Max Time: The maximum broadcasting time in second for a
broadcasting request. When exceeding the maximum broadcast time,
SIPPBX 6200x will drop this broadcasting call automatically.
• Server Broadcast No Answer Timeout: The default maximum time (in second)
to wait for broadcasted party pick up the phone.
Summation of (Reserved Auto Attendant + Reserved VMS Retrieve +
Reserved Conference + Reserved Wakeup Call) cannot exceed the limitation of
DSP resources. If it is smaller than maximum DSP resource, the rest of DSP
resource will be dynamically allocated by required services.
• Reject Any Call from Enhance Service: Reject the call from Enhance Service
itself. It is recommended to be “enable”.
• Service Setting IVR Prefix: The prefix of the service setting IVR. The Service
Setting IVR allowed extension user to change or configure services without
entering completed service codes. The extension user dial the service setting
IVR prefix and the IVR will guide you through voice prompts for service
settings.
• Service Setting Max Operation Timeout: The max time of service setting
operation.
• Service Setting Default Language: The default language of service setting
IVR prompt
• Reserved Service Setting Channel: The reserved channels for service setting
IVR.
Interface
Start Path: Enhance Service > Config > Interface
Figure 6.2-1
Parameter Description:
• UDP Port: The local listen UDP Port.
• Min DTMF Interval (msec): The minimum interval between two DTMF digits in
mini-second.
• G.711 Psize: G.711 transmission packet size (default: 20ms)
• G.723 Psize: G.723 transmission packet size (default: 30ms)
• G.729 Psize: G.729 transmission packet size (default: 20ms)
• NAT Traversal: Enable or Disable NAT Traversal feature of enhance service.