Welltech SIPPBX 6200 V.3.1.1 - Manual (Page 33)

Welltech Technology Co., Ltd.
SIPPBX 6200S, 6200GS, 6200N Release 3.1.1
User Guide
- 33 -
• SIP Realm: SIP registrar domain.
• Register IP: SIP registrar IP address.
• Register Port: SIP registrar UDP port number.
• Register TTL: The registration maximum time to live setting when registered
to the SIP registrar.
• Use Outbound Proxy: Use the SIP outbound proxy server or not
Step 2: Choose the prefix you are going to add or modify for the selected SIP
trunk.
Figure 3.6-2
Parameter Description:
• Add into exist prefix: Add the following prefix into the existing call routing.
- Prefix Matched: Called number prefix to be matched.
- TEL NO: Subscriber number for routes.
- Priority: Select a priority of this routes.
• Create a Prefix Route: Create a new call routing for the following prefix.
- Prefix Matched: Called number prefix to be matched.
- TEL NO: Subscriber number for routes.
- Hunting Method: Select one of 10 methods which are Priority, Max Idle
Time, Ring All (First Ring), Ring All (First Answer), Round Robin (Ring
Only), Priority (Ring Only), Max Idle Time (Ring Only), Round Robin (Load
Balance), Priority (Load Balance) and Max Idle Time (Load Balance).
- No Answer Time Out: If entering with digit “0”, SIPPBX 6200x use
Enhance Service default time (seconds) for reference. If you fill in an valid
number start from 1, SIPPBX 6200x regard this time as timer to wait for
remote SIP Server response.
Note: After you create the SIP trunk successfully, you will see the corresponding
records in the UAC part and the Call Routing part.
Call Pickup Group Wizard
Within the same pickup group, the extensions are allowed dialing the group
pickup access code to pickup a ring call which stay at the same group.
Start Path: Home > Call Pickup Group Wizard