Welltech SIPPBX 6200 V.3.1.1 - Manual (Page 120)

Welltech Technology Co., Ltd.
SIPPBX 6200S, 6200GS, 6200N Release 3.1.1
User Guide
- 120 -
- Access Code 2 Goto: It is used when the user is not calling from his
phone but would like to access his voice mail. The system will ask for
voice mail account and password.
• : VMS Personal Greeting record.
This component is used for caller to record their owned personal greeting by
phone-set.
Figure 7.3-3
- Start Prompt: Prompt for start to leave message.
- Auto-Replay Prompt: Prompt for auto-replay.
- Confirm Prompt: Prompt for confirming the left message.
- Confirm Error Prompt: Prompt if not confirm the left message by user.
- Max Record Time: Maximum time to be recorded.
- Max Retry: The maximum retry times for left message.
- DTMF Receive Timeout: The maximum time to receive confirmation
from user.
- Stop Key: Stop key.
- Confirm Key: Confirm key.
- Re-Record Key: re-record key.
- Record Beep Tone: Record after beep tone.
- Auto-Replay: Auto replay or not.
- Interrupted by key: Stop play when user press any key.
- Clear Digits before start: To clear the digits before starting to play.
- Success Goto: Next component to be executed if the operation is
successful.
- Fail Goto: Next component to be executed if an error is occurred.
• : VMS Authentication
This component is used to authenticate the caller to access their voice mail.