Cdr/aaa – Welltech SIPPBX 6200 V.3.1.1 User Manual
Page 43
Welltech Technology Co., Ltd.
SIPPBX 6200S, 6200GS, 6200N Release 3.1.1
User Guide
- 43 -
•
License Key: System parameter
Note: Please don’t change it unless under Welltech’s instruction.
CDR/AAA
SIPPBX 6200x system supports CDR (Call Detail Record) for connecting to
external enterprise billing server via IP port. The
step setting for connecting to CAS 2000 billing software. Figure 4.4-1 is the CDR
parameters webpage.
Start Path: Configuration > CDR
Figure 4.4-1
Parameter Description:
•
TCP Port: The local TCP port, for instance, 10092.
•
Trust Provisional IP: Trust provisional IP or not.
•
Auth Mode: Enable Log in request or not.
•
Login Prompt: Login prompt
•
Password Prompt: Password prompt
•
CDR Format: Select Type 1, Type 2, Type 3 or Full types. Please refer to
•
Max CDR File Keep Days: The maximum days to keep CDR records inside
SIPPBX 6200x.
•
CDR Send Delay (ms): The delay time of sending CDR after a call.
•
Output Mode: The output mode for the CDR to be
TCP, File or both
. If you
want to connect to External Enterprise Billing Server, it is required to have
TCP
mode enabled.
•
Send Zero Session Time: Enable send zero duration CDR or not. If it was
enabled, the unconnected call will be written to CDR.
•
Send Billing Start: Whether to send a start CDR record to external CDR
server or not when the call was connected.
•
CDR Report: Enable or disable CDR Report. When enable the CDR report,
each call will be recorded for report purpose. If you are using the external
billing software, it is recommended not to turn it on.
•
CDR Report Time Format: The date time format of CDR report. Supported