Welltech SIPPBX 6200 V.3.1.1 - Manual (Page 91)

Welltech Technology Co., Ltd.
SIPPBX 6200S, 6200GS, 6200N Release 3.1.1
User Guide
- 91 -
Security
• Disable Un-Register All: Disable Un-Register all
• Disable RADIUS Billing Send: Disable RADIUS Billing Send
• Trust Network: Show the trunk the real caller number. When the user uses
the anonymous method, if the SIPPBX 6200 is enable the Trust Network,
the trunk will know the real caller but will hide the real caller number for the
called part. This will enhance the security.
Misc
• Sync to Address: Set SIP to header.
• Response to Sending Port: Response to CPE sending port instead of
public contact port.
• Response to Top Via: Response SIP message to the top via IP address and
port.
• CTI: Computer Telephony Integration (reserved item) Internal use only
• Disable Qop: Disable sending qop tag in SIP 401 and 407 authentication
header.
• Register Event Log: The system will trigger a system event when the
subscriber is registered and unregistered. For a predefine user, the system
will also fire a system event when the predefined user is no response and
responding.
IXC Service (Internet Exchange Center Service)
Incoming Call
• Matched Prefix: The SIPPBX 6200x will ask for adding this prefix code for
every call dialed to the trunk gateway.
• Disable Remove Prefix: the SIPPBX 6200x do not allow for removing the
added prefix.
Outgoing Call
• Outgoing Added Prefix: The SIPPBX 6200x will add this prefix code for all
calls dialed out from the trunk gateway.
Parameter Button
• Copy: Copy service setting from a subscriber.
• Mask: Set the subscriber visual view of the service. If you disable the mask
of a service, the subscriber login will not be able to see it.
UAC
SIPPBX 6200x can register to another proxy server as a standard SIP UAC
(User Agent Client). You can have hieratical SIP proxy architecture by using
UAC settings. Once you define the UAC here, you also need to create a
gateway which device type is UAC for routing purpose.
Start Path: Enhance Service > UAC
Modify:
Select the item you want to modify: