Welltech SIPPBX 6200 V.3.1.1 - Manual (Page 127)

Welltech Technology Co., Ltd.
SIPPBX 6200S, 6200GS, 6200N Release 3.1.1
User Guide
- 127 -
caller is not in Extension list.
• : Service Setting Apply
This component is used to collect necessary service setting information and
apply it to the system.
Figure 7.4-3
- Service Type Code: The Service Type Code to be applied*. Please
Refer Appendix 9 Service Type List.
- Collect Valid Time: Collect the timing information or not.
- Start Time Prompt ID: Prompt for collecting Start Time.*
- Stop Time Prompt ID: Prompt for collecting Stop Time.*
- Collect Number: Collect telephone number information or not.
- Collect Number Prompt ID: Prompt for collecting phone number.*
- Collect Count Pre-Announce Prompt ID: When you have multiple
parameters to be collected, this is the prompt for the number. In
Chinese, this will be the “第” and in English this will be “Parameter”.
- Collect Count Unit Prompt ID: This is prompt to be played after the
number. In Chinese, it could be “組”. In English, it could be a silence.
- Max Collect Digits: Maximum digits to be collected.
- Min Collect Digits: Minimum digits to be collected.
- Repeat Collect: Repeat the collected number, start time and stop time
that you entered before applying it.
- Repeat Start Time Prompt ID: Prompt for playing “The Start time you