Welltech SIPPBX 6200 V.3.1.1 User Manual
Page 80
Welltech Technology Co., Ltd.
SIPPBX 6200S, 6200GS, 6200N Release 3.1.1
User Guide
- 80 -
- Radius: Send to RADIUS for call permission.
•
Emergency Group: Emergency call group.
•
Caller ID Mode: Displace caller ID or not
- Inhibit: Hide the called party number.
- Transparent: Pass through the caller ID.
•
Device Type: Subscriber device type
- Subscriber: Subscriber user.
- Softphone: Not Available now.
•
Hunting Method: Call forking method.
- Sequential: Call hunting each contact in sequence.
- Parallel (answer): Send multiple call invites to multiple contacts
simultaneously. When a user answer an ring call, disconnect others
contacts (Stop Ring to other devices with the multiple contacts).
•
Preferred RTP Group: Preference RTP resource server group to be used.
•
Register Type: Subscriber register type.
-
Dynamic
: Subscriber needs to send register message for availability.
-
Predefine
: Subscriber will be handled as a permanent user.
Predefine URI1: Predefine subscriber URI1 (i.e.
sip:[email protected])
Predefine URI2: Predefine subscriber URI2 (i.e.
sip:[email protected])
-
Predefine/NAT
: Subscriber will be handled as a permanent NAT user
(manual IP and Port mapping is required)
Predefine URI 1: Predefine NAT subscriber URI (i.e.
sip:[email protected]: 7777)
Public TA: mapped NAT Server IP address and port (i.e.
61.218.42.217:5060)
-
LCS Dynamic
: This is used only when the subscriber type is a regular
subscriber and also a LCS user. You can use IP phone or CPE to
register this account and also it will ring the LCS communicator client
software simultaneously.
•
RTP Proxy: Use RTP Proxy or not.
-
Yes
: Always use the RTP Proxy.
-
No
: Always not to use RTP Proxy.
-
Auto
: Automatic decide to use RTP Proxy or not (recommended).
-
Recorder
: The subscriber is required voice recording.
-
Recording on Demand
: Use Recorder on demand service (WellRec
5600 is required to install).
-
Auto (n-NAT)
: This is only used when you have a NAT box behind a
NAT box (i.e. Multiple NAT router). It is mainly for testing or a special
environment.
•
NAT Group: NAT group can be used for enterprise user. When two
subscribers have the same NAT group defined, SIPPBX 6200x won’t use
NAT Proxy (Voice RTP call doesn’t go through RTP Server or 6200x) when
both subscribers have the same NAT group.
•
Max Register Time: The maximum register time when a user is coming
from public IP network (the internet).
•
Max NAT Register Time: The maximum register time when an IP device is
situated behind NAT.