Welltech SIPPBX 6200 V.3.1.1 - Manual (Page 155)

Welltech Technology Co., Ltd.
SIPPBX 6200S, 6200GS, 6200N Release 3.1.1
User Guide
- 155 -
Chapter 10 Telnet & RS-232 Configuration
SIPPBX 6200x also can support to be managed by Telnet or Console port
(RS-232) for basic operations.
Interface:
 Network: TCP/IP Telnet (i.e. telnet 192.168.67.1:10086)
 RS232:
- Connect using: COM1
- Baud Rate: 9600
- Data bits: 8
- Parity: None
- Stop bits: 1
- Flow Control: None
- Wire: Null modem line (cross-cable)
Login SIPPBX 6200x by Telnet
Use Windows build-in Hyper Terminal or other Telnet terminal emulator to login
(e.g. telnet 192.168.111.101:10086). User ID & password will be required for
login ( default login user id: admin, password: admin & user id: root, password:
root).
Command List:
Command Description
echo Auto echo on or off
eventlog Clean or show system log message
exit Quit the current session
ipconfig Configure or show network1,2 information
ping Check an IP address is available or not
reboot Reboot
reset Soft-reset
shutdown Shutdown
time Reset or show system time.
timezone Setup or show system timezone
useradmin Manage user account.
help & ? View command list
Echo: auto echo on or not
Command Purpose
[root#]echo ? Usage: echo on/off
Example: echo on
[root#]echo on Echo is on
[root#]echo off Echo is off (default value)
Eventlog: show system log message