Welltech SIPPBX 6200 V.3.1.1 User Manual
Page 30
Welltech Technology Co., Ltd.
SIPPBX 6200S, 6200GS, 6200N Release 3.1.1
User Guide
- 30 -
Figure 3.5-1
Parameter Description:
•
New or Modify: Create or modify a PSTN gateway setup.
•
Belonged Office: Belonged office ID.
•
Register Number: Register Telephone number or user account.
•
Register User Password: Register user password (device password only)
•
Register Type: Subscriber register type.
-
Dynamic
: Subscriber send register message for availability
-
Predefine
: Subscriber will be handled as a permanent user.
Predefine URI1: Predefine subscriber URI1 (i.e.
)
Predefine URI2: Predefine subscriber URI2 (i.e.
)
-
Predefine/NAT
: Subscriber will be handled as a permanent NAT user
(Enter IP address and Port number mapping manually is required)
Predefine URI 1: Predefine NAT subscriber URI (i.e.
sip:[email protected]:7777
)
Public TA: mapped NAT Server IP address and port (i.e.
61.218.42.217:5060
)
- LCS Dynamic: This is used only when the subscriber type is a regular
subscriber and also a Windows LCS user. You can use IP phone or CPE
to register this account and also it will ring the LCS communicator client
software simultaneously.
•
Device Type: Define PSTN Gateway device type.
-
Gateway
: Gateway (e.g. E1/T1 Trunk gateway or FXO gateway)
-
Gateway/RTP
: Welltech E1/T1 Gateway, WellGate 5250
- Proxy/RTP: Welltech SIPPBX 6200x
- SIP Proxy: SIP proxy server
- IVR/VMS: IP IVR or VMS server
- IVR/VMS/RTP: Welltech IVR or VMS server
- Recorder: Welltech IP Recorder
- Outbound Caller: Outbound Caller
- Register UAC: Register user agent client
User Agent ID: User agent ID in UAC
Caller Info: Display calling party information
▪ Caller TEL No: Display original caller ID.
▪ Registered TEL No: Registered UAC user ID.
▪ Caller Display Name: SIP display name for original caller.