Visara Master Console Center Administration Guide - Manual (Page 45)

Chapter 4 MCC Configuration File Management
Administration Guide 45
keymap.cfg: Keyboard Mappings
The keymap configuration file contains data necessary for the various hardware
and OS consoles defined in the system.cfg file. Its purpose is to define the
keymap file for X terminal vendors, since manufacturers can implement different
keycode values for each key on the keyboard.
There are three valid formats for defining X terminals:
To add all Tektronix X terminals, add this line:
vendor:Tek=config/keymaps/tek
To add the MCC terminal at IP address 192.1.1.51, add:
display:192.1.1.51=config/keymaps/tek
To use the config/keymaps/default file for all X terminals not otherwise defined,
use this line:
default=config/keymaps/default
The following line must be present for gwcharcons to function properly:
type:char_default=config/keymaps/gwcharcons
osgroup.cfg: OS Groups
The OS Group configuration file contains all necessary information for MCC
operating system groups. All modifications of this file must be made through the
OS Group Editor. Direct editing of this file is not necessary. See Chapter 6
Defining and Changing OS Groups for more information.
security.cfg: User Security
The security configuration file contains all necessary information for MCC security. All
modifications of this file must be made through the Security Editor. Direct editing of this
file is not necessary. See Chapter 8 Administering Users for more information on MCC
Security.
snmp.cfg: SNMP Agents
The SNMP Agent configuration file contains information on SNMP Agents and
SNMP Agent groups. All modification of this file must be made through the
SNMP Setup option of the Administration—Configuration menu. Direct editing
of this file is not necessary. See Chapter 7 Setting Up SNMP for more
information.