Visara Master Console Center Administration Guide - Manual (Page 154)

Visara Master Console Center
154 © Visara International 2007
To delete an SNMP trap rule action:
1.
From the SNMP Trap window, select an action.
2. Click Delete, and then click OK on the confirmation box.
Creating or Modifying SNMP Trap Rule Actions
When the New or Modify button is selected on the SNMP Trap Rule window,
the New/Modify SNMP Trap Rule Action window appears.
Figure 26 Modify SNMP Trap Action window
Note: See Common Actions Fields on page 144 and Additional Action
Fields on page 145 for information about the Action and Status
field selections.
3. Click the Script Name (…) button to select a script for this trap rule to
run. See the Selecting a Script for the Trap Rule to Execute section
following.
4. Click the Parameters (…) button to select parameters for this Trap rule.
See the Building SNMP Trap Rule Parameters section following.