Visara Master Console Center Administration Guide - Manual (Page 212)

Visara Master Console Center
212 © Visara International 2007
/usr/ics/config/snmp.cfg, OK
/usr/ics/config/status.cfg, OK
/usr/ics/config/system.cfg, 31, 108 ******
/usr/ics/config/MCCsessioncleanup.txt, OK
When no control characters are found, “OK” is appended to the end of the output
line. When control characters are found, the line is appended with the location of
the characters and the string “******”. In the example, control characters were
detected in objmgr.cfg on line 187, and in system.cfg on line 31 and 108.
Scanning Scripts
To scan all scripts after an editing session, enter:
/usr/ics/bin/scanctrl /usr/ics/script/*
An example output follows:
MCCqa:/usr/home/d> /usr/ics/bin/scanctrl /usr/ics/script/qa_*
/usr/ics/script/qa_alarm.scr, OK
/usr/ics/script/qa_alen.scr, OK
/usr/ics/script/qa_alert.scr, OK
/usr/ics/script/qa_areset.scr, OK
/usr/ics/script/qa_ascii.scr, OK
/usr/ics/script/qa_ascrn.scr, OK
/usr/ics/script/qa_asort.scr, OK
/usr/ics/script/qa_asquare_main.scr, OK
/usr/ics/script/qa_asquare_sub.scr, OK
/usr/ics/script/qa_assockeys.scr, OK
/usr/ics/script/qa_atstr.scr, 52, 54 ******
/usr/ics/script/qa_cat_read.scr, OK
/usr/ics/script/qa_charlose.scr, OK
/usr/ics/script/qa_charlose2.scr, OK
/usr/ics/script/qa_charlose3.scr, OK
/usr/ics/script/qa_charlose_call.scr, OK
/usr/ics/script/qa_charlose_sub.scr, OK
/usr/ics/script/qa_class.scr, OK
/usr/ics/script/qa_class_call.scr, OK
/usr/ics/script/qa_codec.scr, 67 ******
/usr/ics/script/qa_conslog.scr, OK
/usr/ics/script/qa_const_check.scr, OK
/usr/ics/script/qa_const_check2.scr, OK
/usr/ics/script/qa_event.scr, OK
/usr/ics/script/qa_event_key.scr, OK
/usr/ics/script/qa_event_log.scr, OK
/usr/ics/script/qa_eventedit.scr, OK
/usr/ics/script/qa_eventedit_sub.scr, OK
/usr/ics/script/qa_formatstr.scr, OK