Verilink WANsuite 5370 (34-00310.D) Product Manual - Manual (Page 75)

W e b S e r v e r I n t e r f a c e 3-45
Figure 3.35 Traffic Meter Statistics Screen
The Traffic Meter Statistics screen reports on the following parameters:
•
Tx Frames
•
Tx Octets
•
Rx Frames
• Rx Octets
• Rate Peak – the peak data rate for the viewed period (see below)
• Rate Average – the average data rate for the viewed period (see below)
The Period Index field is used to define the period of time for which the
Traffic Meter statistics will be reported. It represents the 24-hour, 15-minute
buckets index. Selecting a period and then clicking the “Submit” button will
display the Traffic Meter Statistics for that period. Clicking on the “All
Traffic Meter Intervals” at the bottom of the screen displays the Traffic Meter
Statistics for all intervals as defined below.
Summary Represents the past 24 hours; reports the additive number of frames/octets, the
highest peak encountered for 24 hours, and the average for 24 hours.
Current Reports on the current 15-minute interval.
Interval 1, Interval 2,
..., Interval 96
Reports on intervals 1
−
96 that correspond to the periods completed 15
minutes ago, 30 minutes ago, ..., 24 hours ago.
SNMP Details Screen
The SNMP Details screen (Figure 3.36) lets you configure the SNMP
parameters described in the paragraphs below.