Verilink WANsuite 5370 (34-00310.D) Product Manual User Manual
Page 20
1-6
W A N s u i t e 5 3 7 0
•
Asynchronous Supervisory port that supports local management via
VT100 screens plus asynchronous SCADA
•
Single Network port
•
Dual serial ports (synchronous and asynchronous) software-configurable
for RS-232, EIA-530, or V.35
•
Auxiliary port that supports asynchronous SCADA applications
•
IP Gateway:
•
Frame Relay or PPP
•
10/100Base-T Ethernet port
•
Static routes
•
Static Address Resolution Protocol (ARP)
•
Dynamic routing protocols include RIP 1, RIP 2, and OSPF
•
Un-numbered Network
•
Address Management: NAT and DHCP
•
Programmable alarm thresholds
•
Transparent Bridging
•
Configurable Serial (Data) Port:
•
Supports V.35, EIA-530, and RS-232
•
Security Features
•
IP Host Access List
•
Multilevel password access
•
NAT
•
SCADA:
•
Diagnostics
•
Data Monitor function shows all traffic activity on a given RTU port of
a remote site, as if a data scope were physically connected between the
WANsuite unit and the RTU.
•
RTU loopback lets you set a remote unit’s RTU port in loopback mode
so that any data sent towards the RTU from the central site will be
echoed back towards the central site. Verifies data integrity to the RTU
port.
•
TCP Server allows multiple connections to TCP clients
•
Asynchronous multicasting lets the WANsuite 5370 transmit identical data
to multiple endpoints
•
SCADA traffic priority puts SCADA traffic in a specific queue over a
frame relay link and puts all other traffic (Ethernet, In-Band Management,
Serial Frame Relay) in a normal priority queue.