Parameters to negotiate, Parameters to negotiate -27 – Verilink WANsuite 5370 (34-00310.D) Product Manual User Manual
Page 143

V T 1 0 0 I n t e r f a c e
4-27
Auth Challenge
Interval
The time interval (in seconds) between CHAP challenges. A value of “0”
(zero) disables the periodic authentication challenge.
Values: 0
−
3600
Default: 0 (disabled)
Allow PAP
Allows the peer to negotiate for PAP.
Values: No, Yes
Default: No
Allow CHAP
Allows the peer to negotiate for CHAP.
Values: No, Yes
Default: No
PAP Username
This field is used to log on to the peer. Type the appropriate PAP Username
in this field.
Values: (user established)
Default: Username
PAP Password
This field is used to enter the password necessary to log on to the peer under
a given PAP Username.
Values: (user established)
Default: (none)
CHAP Username
This field is used (along with the CHAP Secret) to challenge the peer. Type
the appropriate CHAP Hostname in this field.
Values: (user established)
Default: Hostname
CHAP Secret
This field is used to enter the Secret (i.e., password) necessary to challenge
the peer.
Values: (user established)
Default: Secret
Initiate Negotiation
Determines whether the port actively sends negotiation requests to the peer
site or passively waits for negotiation requests.
Values: Yes, No
Default: Yes
Parameters To Negotiate
The table displayed near the bottom of the PPP Service Details screen shows
which parameters are set to be negotiated. You can specify which parameters
should be negotiated by selecting the desired option. The parameters are
described in the table below.
Parameter
Description
Protocol Header
Compression
Compresses PPP protocol headers.
Default = Yes
IPCP (IP Control
Protocol)
Compression
Compresses TCP headers using Van Jacobsen compression.
Default = Yes