Verilink WANsuite 5370 (34-00310.D) Product Manual - Manual (Page 144)

4-28 W A N s u i t e 5 3 7 0
PPP Statistics
Selecting the “PPP Statistics” prompt brings up a table (Figure 4.23) that reports
on traffic.
Figure 4.23 PPP Statistics Screen
Period Selects the interval (Current, Summary, or numbered Interval) to be viewed
on the PPP Statistics screen.
Tx Frames Number of frames transmitted by the port.
MRU (Maximum
Receive Units) Informs the peer that the implementation can receive larger
packets, or to request that the peer send smaller packets.
Default = Yes
HDLC Address
Compression Negotiates the compression of high-level data link control
(HDLC) addresses.
Default = Yes
IP Address Dynamically negotiates for IP addresses; otherwise, it is
assumed both sides know each other’s IP addresses.
Default = Yes
ACCM Negotiates the use of control character transparency on
asynchronous links.
Default = Yes
Magic Number Unique numbers useful for detecting loopbacks.
Default = Yes
PAP (Password
Authentication
Protocol) An authentication scheme used by PPP servers to validate the
identity of the originator of the connection.
Default = No
CHAP (Challenge-
Handshake
Authentication
Protocol) An authentication scheme used by PPP servers to validate the
identity of the originator of the connection upon connection or
any time later.
Default = No
Parameter Description