Verilink WANsuite 5370 (34-00310.D) Product Manual User Manual
Page 58
3-28
W A N s u i t e 5 3 7 0
Figure 3.23
PPP Service Details Screen
ACCM
The Asynchronous Control Character Map (ACCM) configuration option
provides a method to negotiate the use of control character transparency on
asynchronous links.
Values: 0–FFFFFFFF (Hex)
Default: FFFFFFFF
MRU (Maximum
Receive Units)
This configuration option may be set to inform the peer that the
implementation can receive larger packets, or to request that the peer send
smaller packets.
Values: 128–4096
Default: 1500
Port IP Address
The IP address of the port. For unnumbered PPP link, set to 0.0.0.0 and set IP
Address Negotiation to “No.”
Default: 192.168.1.2
Peer IP Address
The IP address of the peer that will negotiate authentication protocols.
Default: 192.168.1.3
Virtual PPP over
Endpoint name over which to send PPP encapsulated data (i.e., PPP over
Frame Relay). Valid only when the PPP interface is Virtual.
Auth Challenge
Interval
The time interval (in seconds) between CHAP challenges. A value of “0”
(zero) disables the periodic authentication challenge.
Values: 0
−
3600
Default: 0 (disabled)