Simple mail transfer protocol (smtp), Simple mail transfer protocol (smtp) -79 – Verilink WANsuite 5370 (34-00310.D) Product Manual User Manual
Page 195
V T 1 0 0 I n t e r f a c e
4-79
Designated Bridge
Designated Bridge MAC Address.
Forward
Transmissions
Number of times this port has changed from any other state to a “Forwarding”
state.
Input Frame
Number of frames received.
Output Frame
Number of frames transmitted.
Input Discards
Number of frames discarded.
Figure 4.79
Bridge Lookup Table
Address
MAC Address learned and included in the forwarding table.
Port
Port where the MAC Address was learned.
Status
How the address was included in the forwarding table. The two possibilities
include “Self” (the unit’s own MAC address), and “Learned” (the unit-learned
MAC address is directly accessible by this port).
Simple Mail Transfer Protocol (SMTP)
Use the SMTP Screen (Figure 4.80) to configure the SMTP function of the
WANsuite 5370. SMTP is used to forward notification of events to a user-
definable list of up to five recipients. The even notification is sent as an e-
mail in the following format:
From: [email protected]
To: Event Receiver
Subject: Even Notification
IP Address: 192.168.60.157
System Up Time: 0 days, 01:20:02
System Name:
System Location:
System Contact: