Appendix a specifications, Network interface, Serial 1 and serial 2 interface – Verilink WANsuite 5370 (34-00310.D) Product Manual User Manual
Page 217: Auxiliary port, Management interfaces, Supervisory port, Appendix a, "specifications, In appendix a, specifications, Pecifications
S p e c i f i c a t i o n s
A-1
A
P P E N D I X
A
A
PPENDIX
A
S
PECIFICATIONS
Network Interface
Service Type:
DDS I or DDS II with clear channel
Line Rate:
56 kbps and 72 kbps
Input Signal:
Up to 49 dB of loss
Connection:
RJ-48C jack, 100
Ω
(
±
5%)
Transient Voltage:
1000 V protection, fused input / output
Timing Source:
Network and Internal (56k only)
Operating Modes
Full duplex and point-to-point
Serial 1 and Serial 2 Interface
Connection: DB-25
female
DTE Ports:
Selectable EIA-530, RS-232, or V.35
Data Rate:
Sync:
1200, 2400, 4800, 9600, 19200, 38400, 56000,
57600, 64000, 115200 bps
Async: 1200, 2400, 4800, 9600, 19200, 38400, 57600,
115200 bps
Clocking:
Internal, External
Auxiliary Port
Connection:
DB-9 female
Data Rate:
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
(Default: 9600 bps)
Management Interfaces
Supervisory Port
Connection:
DB-9 female
Data Rate:
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
(Default: 19200 bps)