Verilink WANsuite 5370 (34-00310.D) Product Manual - Manual (Page 34)

3-4 W A N s u i t e 5 3 7 0
Figure 3.2 Maintenance Reset Screen
NOTICE: Performing a “Maintenance Reset” or a “Save and Restart” will
terminate communications with the unit.
Save and Restart Use this button to save the current configuration settings and then restart the
unit. Clicking the “Save and Restart” button on the Unit screen will display a
confirmation screen as shown in Figure 3.3 below. Click the “Save and
Restart” button on the confirmation screen to confirm the action.
Figure 3.3 Save and Restart Confirmation Screen
Interfaces
The WANsuite 5370 has the following interfaces: Network, Serial 1, Serial 2,
10/100 Ethernet, Auxiliary, and Supervisory. Each of the interfaces and their
associated screens/menus are described below.
Network Screen
The Network screen (Figure 3.4) lets you view and make changes to the
Network interface’s configuration as described below. In addition, this screen
provides a table that displays the current status and alarm values for the
Network interface.