Verilink WANsuite 5370 (34-00310.D) Product Manual - Manual (Page 21)

A b o u t t h e W A N s u i t e 5 3 7 0 1-7
• Blowfish encryption on a per-DLCI basis with configurable encryption
key lengths up to 448 bits. This feature offers secure connections to
data-sensitive SCADA sites.
• Supports IP and any byte-oriented asynchronous protocol
• Offers four asynchronous ports
• A Suite of Performance Monitoring Tools:
• Monitoring capability for up to 256 virtual circuits (Data Link Connection
Identifiers, or DLCIs)
• DDS performance monitoring, including complete diagnostic capabilities
and test modes
• SLA monitoring and management
• Committed Information Rate (CIR) enforcement per DLCI
• Programmable alarm thresholds
• E-mail notification of alarm status for immediate notification of potential
network problems
• Management Interfaces:
• WANsight
−
an innovative, embedded Web-based user interface for
remote configuration and real-time reporting via Web browser (Verilink
recommends Microsoft Internet Explorer 5.0 or higher) that decreases
installation and configuration time for service employees, simplifies
troubleshooting and fault isolation of network problems, and optimizes
management of both TDM and frame-based services.
• VT100 or TELNET
• Local Supervisory port
• Ethernet port for management or IP routing
• LCD
• Frame Relay Aware:
• Supports leased-line and frame relay services
• Layer 2 end-to-end visibility and control
• Embedded frame relay test set
• Layer 3 support for visibility beyond the Network layer (up to 25
protocols)
• “Top Talker” reports—find out who’s generating the most IP traffic on
your LAN
Front Panel
The front panel of the WANsuite 5370 (Figure 1.1) has three user-activated
input control buttons, four LED status indicators, and an LCD for front panel
configuration.