Verilink WANsuite 5370 (34-00310.D) Product Manual - Manual (Page 171)

V T 1 0 0 I n t e r f a c e 4-55
Target IP Address Represents the target network that you want this router to reach.
Target IP Mask Mask of the Target IP or network.
Next Hop IP Address: IP address of the next device in the route.
NOTICE: Setting the Target IP Address and Target IP Mask to 0.0.0.0 defines
THE default route for this unit.
Cost Cost of using that route.
Route Status Indicates whether this route is enabled or disabled.
Dynamic Route Table Screen
Access this menu by selecting the “Static Route Table” on the IP Gateway
menu and then selecting Dynamic Route Table. This table shows both
dynamic and circuit tables. Please note that not all parameters are necessarily
defined, depending on whether or not the routes were learned dynamically.
Primarily, the most useful information is included in "Destination," "If Ndx,"
and "Mask" columns.
Figure 4.49 Dynamic Route Table Screen
The Dynamic Route Table displays the fields listed below.
Field Description
Destination Network to be reached.
If Ndx Interface internal number.
Next Hop IP address used to reach the destination network.
Type Direct or Indirect.
Protocols NA
Age NA
Mask Mask of the destination network.