Verilink WANsuite 5370 (34-00310.D) Product Manual - Manual (Page 106)

3-76 W A N s u i t e 5 3 7 0
The Static Entry Table screen provides the following user-activated buttons:
Figure 3.71 static Entry Details Screen
IP Address List Table Screen
The IP Address List screen (Figure 3.4) displays the “pool” of addresses
available for DHCP clients. These parameters are configured on the IP
Address List Details screen accessed by clicking on an “Index” number.
Figure 3.72 IP Address List Table Screen
Start Starting IP Address of the DHCP client pool.
End Ending IP Address of the DHCP client pool.
Subnet Mask Subnet Mask associated with the defined range.
Exclude Start Beginning of “excluded” range.
Exclude End End of “excluded” range.
The IP Address List screen provides the following user-activated buttons:
Button Function
DHCP Details Returns the user to the previous screen.
Add New Lets the user add an additional Static Entry.
Button Function
DHCP Details Returns the user to the previous screen.
Add New Lets the user add an additional IP address.