Verilink WANsuite 5370 (34-00310.D) Product Manual - Manual (Page 57)

W e b S e r v e r I n t e r f a c e 3-27
SCADA Loopback Determines if and where SCADA will loopback received data.
Values: None, Loopback to Network, Loopback to Port
Default: None
The table below these parameters displays the SCADA statistics.
The SCADA Details screen provides the following user-activated buttons:
Figure 3.21 SCADA Device Table
Select the appropriate numbered link under the “Device column to access the
SCADA Device Details screen(Figure 3.30) where you can map SCADA
devices to endpoints.
Figure 3.22 SCADA Device Details
PPP Service Details Screen
Click on “PPP” under the “Type” column on the Services screen to view the
PPP Service Details screen (Figure 3.23). This menu gives you access to the
configuration parameters described in the paragraphs listed below.
Button Function
Submit Sets any values that have been changed.
SCADA Device List Displays a table that shows the mapping between
SCADA devices and endpoints
(Figure 3.21) .
Clear SCADA Statistics Clears all SCADA statistics.