Verilink WANsuite 5370 (34-00310.D) Product Manual - Manual (Page 70)

3-40 W A N s u i t e 5 3 7 0
CIR Threshold Sets the Tx over CIR alarm threshold. This threshold is the number of bits per
second in excess of CIR during a 15-minute interval. Setting this field to “0”
(zero) disables the alarm.
CIR Alarm Reports if the Tx over CIR threshold has been exceeded.
Bits Over Be Threshold Sets the Tx over Be alarm threshold. This threshold is the number of bits per
second in excess of CIR + Be during a 15-minute interval. Setting this field to
“0” (zero) disables the alarm.
Bits Over Be Alarm Reports if the Tx over Be threshold has been exceeded.
Congestion Threshold Sets the Rx Congestion alarm threshold. This threshold is the number of
frames received with BECN/FECN. Setting this field to “0” (zero) disables
the alarm.
Congestion Alarm Reports if the Rx Congestion threshold has been exceeded.
BECN in CIR Alarm Reports if Backward Explicit Congestion Notification (BECN) has been
received within CIR.
UAS Threshold Sets the UAS (Unavailable Seconds) alarm threshold. This threshold occurs
after the DLCI is unavailable for a specified number of seconds. Setting this
field to “0” (zero) disables the alarm.
UAS Alarm Reports if the UAS threshold has been exceeded.
The DLCI Details screen provides the following user-activated buttons:
DLCI Statistics Screen
Clicking the “DLCI Statistics” button on the DLCI Details screen will display
a summary (Figure 3.32) of the Transmit, Receive, and Performance statistics
for the selected DLCI for a specific period.
Button Function
Submit Sets and activates any DLCI parameters values that have been
changed.
Clear Alarms Clears all DLCI alarms.
DLCI Statistics Displays a table of the statistics for this DLCI.
DLCI Table Displays a table of all DLCIs on a specific frame relay service, with
their state and alarm conditions.