Teac GigaPulse - Manual (Page 95)

95
GigaPulse
™
User Guide
Gig
aP
uls
e-P
ro
Sig
na
l F
lo
w
GigaPulse-Pro Signal Flow
95
7-Channel Audio:
To get a full 7-channel surround environment in the studio you would need 7 speakers
arranged similar to the mic positions to reproduce the GigaPulse Halls & Rooms. Other
impulse banks in the future could have differing mic setups. The Wide mics could be in
between the front and center mics for a wide screen array for example. (Like 7.1 theater
cinema setups)
If we were connecting the GigaStudio audio card directly to the speakers, this is how
the audio outputs would get assigned.
Outputs 1,2 to the Front Left & Right Speakers
Outputs 3,4 to the Wide Left & Right Speakers
Outputs 5,6 to the Surround Left & Right Speakers
Outputs 7 to the Center Speaker.
The same concept applies if you are using a mixer, rewire or an external sequencer.
Eventually, these channels would be routed to these particular speakers.
5-Channel Audio
If you don’t have a full 7.1 channel system but instead have a 5.1 system, you could do a
couple of things.
Disable the Wide Left & Right
Mic positions and just not
use them.
Or you could keep them enabled and assign
them to the same channels as the Front Left
& Right Mic channels.
This would then only use 5 channels instead
of 7. Those can then be routed to 5 audio
outputs.