Update local source placement group, Radio button options – Teac GigaPulse User Manual

Page 173

173

GigaPulse

™

User Guide

lse

ild

er-

ce P

lac

Impulse Builder-Source Placement

173

Update Local Source Placement Group:

The

Guess Fill

Button auto ﬁlls any empty ﬁelds in the current source placement in

accordance with the radio button options, below.

This button is grayed out if the local ﬁelds are all ﬁlled.

The

Clear All

Button: clears all the ﬁelds in the current source placement.

The “Source Placement Location/Conﬁguration”ﬁelds will all be set to default values.

This button is grayed out if the local ﬁelds are all empty.

The

Clear Plc Info

Button clears all the ﬁelds in the top portion of the current source

placement. It is grayed out if the top portion ﬁelds are all empty.

The

Clear PCM

Button clears all the

PCM Wave Data File Path ﬁelds

of the current source

placement. It is grayed out if the top portion ﬁelds are all empty.

Radio Button Options:

The

Label Substitution

button will auto ﬁll the ﬁelds with identical data as the‘Fill

From’ source, but will substitute known microphone labels.

For example:

· Room6_P4_LF.wav (placement4, Left Front) would have

· LF substituted by RF (right front),

· LW (left wide), RW (right wide),

· LS (left surround), RS (right surround), and

· C (center)

(Assuming LF, RF, LW, RW, LS, RS, and C are the microphone labels)

The

Copy Fill

button will auto ﬁll the ﬁelds with identical data as the‘Fill From’source,

so you may hand edit any required changes.

The

1st Num Sub

button will auto ﬁll the ﬁelds with identical data as the Fill From

source, but will substitute the ﬁrst numerical value in the ﬁeld with an incremented

value.

For example, Source01_Impulse03 would be substituted with Source02_Impulse03.