Teac GigaPulse - Manual (Page 166)

166
GigaPulse
™
User Guide
Im
pu
lse
Bu
ild
er-
So
ur
ce P
lac
em
en
t
Impulse Builder-Source Placement
166
Wave Data Conversion:
When you enter or browse to a wave file path, that wave is checked for stereo data. If it
is a stereo wave, you will be give a choice as to how the wave data is to be used. Your
choices are displayed in this column.
Mono channel waves will have no specification and you won’t see this window.
Stereo channel waves will have one of these following options:
The Use Left Data on this audio Channel radio
button will assign the left channel of the wave
The Average Left and Right Data and use the
result on this audio channel will mix
This will mix
together and
file to the current microphone position. The signal will remain monaural.
together and average both the left and the right channels of the wave file to the current
microphone position, thereby returning both as a single monaural signal
average both the Left and the Right channels of the wave file to the current Mic
Position. (This is most often used for the Center Channel)
The Use Left Data on this audio channel. Use Right Data on next audio channel radio
button will assign the left channel of the wave file to the current microphone position
and also automatically assign the right channel of the wave file to the next microphone
position.
This will be the most often used method when dealing with stereo samples.